Standart Membran
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zone. In producing this type of membranes, APP (Atactic Polypropylene) with thermoplastic resin is used for to enhance of the bitum. Also incerasing, physical strength of the membranes being used glassfiber tissue and nonwoven polyester mat as a bearing and reinforcement system.
Application Areas: Bituminous membranes can be applied in all the areas where water can affect the structure like the walls which have contact with ground, foundations and layers with the ground.
They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets.
|
Cold Bending |
: |
-5 °C |
|
Temperature Resistance (Minimum) |
: |
110 °C |
|
Breaking Point (Fraass) |
: |
-15°C |
Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many details ovides better economical and aesthetic solutions.
Features: It protects its good adherence specialty after the application and it is certain solution for all waterproofing issues especially in the basement applications. It can be applied all different surfaces like wood, cement and metals.
It has shown the property of enhanced elasticity against the transversal and longitudinal structural movement. It also stands against the building movements and structural expansion differencies.
Our membranes neither dissolve or discharge in warm weather condition not cracked in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes.
It is suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are durable same as building life is if they are applied correct way.
Our PANDA Series waterproofing membranes are the plastomeric type waterproofing membranes that are the ideal preference in the terrestrial climate (mid-cold) zone. In our membranes, APP (Atactic Polypropylene) with thermoplastic resin is used to increase the physical strength of the membranes. Our Panda serial is very enduring with physical and chemical influence.
Bituminous membranes can be applied in all the areas where water can affect the structure like the walls which have contact with ground, foundations and layers with the ground. They can also be used in external walls which is below of the water level, balconies, terraces, bathrooms and toilets.
|
Soğukta Bükülme |
: |
-10 °C |
|
Sıcaklık Dayanımı (En az) |
: |
120 °C |
|
Kırılma Noktası (Frass) |
: |
-20°C |
Additionally they can be used in the structures for water reservoirs, artificial ponds and the places with high tensions like highways , bridges, viaduct constructions.
Our FOK Serial waterproofing membranes are elastomeric type waterproofing membranes that are the ideal preference in the cold climate zone. In producing this type of membranes, have been used SBS (Styrene-Butadiene-Styrene) with thermoplastic resin for to enhance of the asphalt.
FOK SERIES membranes are preferable for the light metal roofs of industrial and trade because this product has ability to adjust movements of roofs caused by expansion and narrowings on the surface of the roof.
It is mostly suitable for cold climates.
|
Soğukta Bükülme |
: |
-20 °C |
|
Sıcaklık Dayanımı (En az) |
: |
100 °C |
|
Kırılma Noktası (Frass) |
: |
-35°C |
Fok series membranes can be applied in all the areas where water can affect the structure like the walls which have contact with ground, foundations and layers with the ground. They can also be used in external walls which is below of the water level, balconies, terraces, bathrooms and toilets
Additionally they can be used in the structures for water reservoirs, artificial ponds and the places with high tensions like highways, bridges, viaduct constructions.
Uno Series
Uno Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zone. In producing this type of membranes, APP (Atactic Polypropylene) with thermoplastic resin is used for to enhance of the bitum. Also increasing, physical strength of the membranes being used glassfiber tissue and nonwoven polyester mat as a bearing and reinforcement system
Features:
It is an economical membrane which have full impermeability of water.
They can be used different surfaces like wood, concrete and metals.
They can be applied with blow torch .
It is suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are durable same as building life is if they are applied correct way
Application Areas:
Bituminous membranes can be applied in all the areas where water can affect the structure like the walls which have contact with ground, foundations and layers with the ground.
They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets.
Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls.
Simshingle is an aesthetic roof covering material with is APP modified bitum and 110 gr/m² fiber glass reinforcement, with upper side coated with attractive colurful reflective minerals and bottom side coated with polyethylen film.
- 100 % App Modified Simshingle
- Resistant to extreme weahter conditions and wind.
- Does not leave from sticked surfaces.
- Imprevious to ultraviolet radiation.
- Resillient and break-proof.
- Does not affected by major temperature differences.
- Fastened surfacing granules.
- Light, easy to apply and carry and do not create extra weight for building.
- Can be applied through adhering by torching.
- Does not require any extra accessories and maintenance.
- Wide range of colours and shapes.
- It is aesthetic with durable colour and long-life lasting.
Simself Membrane
SimSelf membrane is a bitumen-based water insulation membrane.
One of its surfaces is coated with polyethylene or colored natural mineral while its other face contains a removable folio.
- One of SimSelf membrane’s surfaces is produced as mineral coated, thus it isn’t affected negatively by sunshine. It can be used as top layer coating material. SimSelf Tape offers practical solutions for many details with its waterproof characteristic, compatibility with building movements and its self adhesion ability. It can be applied also on inclined and curvilinear surfaces thanks to its flexibility. It is produced in 1m wide and 10m long rolls.SimSelf Tape becomes ready to be adhered when the removable film on one of its surfaces is removed. Moreover, the application area needs to be clean and dry for ensuring good adhesion. However, a standard bitumen plaster must be applied on the surface before applying SimSelf Tape on concrete surfaces and SimSelf Membrane must be adhered onto the dry surface after this plaster layer dries.
Application Areas:
SimSelf membrane can be used for many details such as the cracks occurring on walls, parapets, chimney flashings, barges, copings, gable walls and roofing sheets while it can also be used on deck coating insulations of ships and automotive sector as it can be adhered on many surfaces like wood, metal, glass, plaster and concrete ones etc.
SimSelf can be used easily in areas where bottled gas and blow cutters are not possible or dangerous o be used. Its self-adhesive lower surface can be applied to such materials as wooden and plastic surfaces as well as XPS – EPS etc. which cannot bear high temperatures. Besides, it is very easy to be used on inclined and curvilinear roofs. It can take the shape of surfaces on which it is applied.
Simself Tape
SimSelf Tape is a bitumen-based water insulation tape. Its one surface is covered with Aluminum or Colored Minerals and the other surface consists of a removable film. SimSelf Tape is not affected negatively by sunshine thanks to its natural aluminum folio or Natural mineral coating. It can be applied also on inclined and curvilinear surfaces thanks to its flexibility.
SimSelf Tape offers practical solutions for many details with its waterproof characteristic and self-adhesion ability. It is produced in 10-15-20-30-60 cm wide and 10m long rolls.
SimSelf Tape becomes ready to be adhered when the removable film on one of its surfaces is removed. Moreover, the application area needs to be clean and dry for ensuring good adhesion. However, a Standard bitumen plaster must be applied on the surface before applying SimSelf Tape on concrete surfaces and SimSelf Membrane must be adhered onto the dry surface after this plaster layer dries.